Measurement Of Min, Max, Average, Voltage And Current - AEMC 8335 User Manual

Item Function
Instantaneous value cursor; change values with the cursor using the ◄ and ► buttons
1
2
Peak factor for each graph
Instantaneous value of the signals at the intersection of the cursor and the graphs
t: time relative to the start of the period (expressed in milliseconds)
3 A1: instantaneous value of the phase current of graph 1
A2: instantaneous value of the phase current of graph 2
A3: instantaneous value of phase current of graph 3
Note: L1, L2 and L3 display the peak factors of the current and of the voltage
respectively for phases 1, 2 and 3.
5.1.4 Measurement of Min, Max, Average, Voltage and
Current Values
This sub-menu displays the RMS, maximum, minimum and average values for
voltage and current, together with those for the instantaneous positive and nega-
tive voltage and current peaks.
NOTE: The display screen varies depending on which value is selected.
The columns display the values relative to each voltage, current or neutral graph.
Item Function
Maximum RMS value of the voltage or current from powering of the PowerPad
MAX
the last time the
RMS
True effective value of voltage or current
Minimum RMS value of the voltage or current from powering of the PowerPad
MIN
the last time the
PEAK+ Maximum peak value of the voltage or current
PEAK-
Minimum peak value of the voltage or current
46
Figure 5-11
button is pressed.
button is pressed.
Power Quality Analyzer Model 8335
or from
®
or from
®