Continuity Test - AEMC 607 User Manual

Clamp-on meter

Hide thumbs Also See for 607:

Table of Contents

In AC and AC+DC:

Display

1st row

2nd row

3rd row

4.6 CONTINUITY TEST

WARNING:

OFF and all capacitors have been discharged.

1. Set the rotary switch to

2. Connect the black lead to the COM terminal and the red lead to the

3. Connect the test probes or the alligator clips to the circuit or component to be

measured.

An audible signal is emitted if there is continuity and the measured value is

displayed on the screen.

Clamp-On Meter Model 607- User Manual

Quantity

Total RMS voltage V

Crest factor (CF)

DC voltage component, V

Before performing the test, make sure that the circuit is

; the

or T

RMS

symbol is displayed.

terminal.

Table of Contents