Specific Specifications in MAX/MIN model (from 10 Hz to 1 kHz):
Accuracy: add 1 % R to the values of the table above.
Capture of the extreme: approximately 100 ms.
5.2.22 Specifications in THDr
Measurement Range
Specified Measurement
Range
Accuracy
Resolution
5.2.23 Specifications in THDf
Measurement Range
Specified Measurement
Range
Accuracy
Resolution
NOTE:
The display is
(V < 8 V or I < 9 A) or if the frequency is less than 5 Hz.
Specific characteristics in MAX/MIN mode in THD (from 10 Hz to 1 kHz):
■ Accuracy: add 1 % R to the values in the table above.
■ Capture time of the extreme: approximately 100 ms
Clamp-On Meter Model 607- User Manual
(0.0 to 100) %
(0 to 100) % of the measurement range
± (5 % R ± 2 cts) in voltage
± (5 % R ± 5 cts) in current
(0.0 to 100) %
(0 to 100) % of the measurement range
± (5 % R ± 2 cts) in voltage
± (5 % R ± 5 cts) in current
if the input signal is too low
1 %
1 %
63