Adjusting Color By Saturation; Signal Color Correction; Adjusting The Color Space; Adjusting Color By Temperature - Christie Mirage HD25 User Manual

Adjusting color by saturation

Change the strength of the primary color in relation to the other primary colors.
1. Select MENU > Configuration > Color Saturation.
2. Adjust the value of the primary color you selected by using more or less of it in relation to the
other primary colors.
3. To confirm your selection, select Enter.
4. Repeat steps 2 and 3 for each primary color.
5. To view a specific color while adjusting, select Show Color Pattern.
6. Select the appropriate color and select Enter.

Signal color correction

Adjust the video signal color as required.
For best results, Christie recommends setting all color and gamma settings to Auto Detect.

Adjusting the color space

Determine how the color components are decoded for accurate color in the display.
1. Select MENU > Image Settings > Color & Gamma > Color Space.
2. Select the adjustment most suited to the input signal:
• Auto Detect
• RGB (Full Range)
• RGB (Limited Range)
• YCbCr HDTV (Expanded Range)
• YCbCr JPEG (Full Range)
• YCbCr UHDTV (ITU-R BT.2020)
• YCbCr UHDTV (ITU-R BT.2020) (Full Range)
• YCbCr HDTV (ITU-R BT.709)
3. Select Enter.

Adjusting color by temperature

Adjust the color temperature as expressed in degrees Kelvin.
1. Select MENU > Image Settings > Color & Gamma.
2. Select Color Temperature.
3. Adjust the slider to change the light to warmer or cooler and select Enter.
Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25
020-102649-01 Rev. 1 (04-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Adjusting the image
27