Logging/Digital Maintenance Log (Home Screen (4)) - Omron K6CM Usage Manual

1-5 Logging/Digital Maintenance Log
(Home Screen (4))
After setting the parameter of Alarm Set-
tings, the Home Screen (4) is displayed. A
check mark appears to the left of Alarm
Settings.
You can set the following items on the Home Screen (4):
Settings Item
Logging
Digital Maintenance Log
How to Log the Data
1
Click the Logging Button on the
Home Screen (4).
Check that the alarm value set in
Alarm Settings is within the normal
range and not in an abnormal condi-
tion.
Be sure to perform logging while the
equipment is actually operating.
Refer to Section 5 Logging on page
47 for details.
How to Make Digital Maintenance Log Setting
1
Click the Digital Maintenance Log
Button on the Home Screen (4).
This function is displayed on the
screen only for K7DD.
Refer to Section 6 Digital Mainte-
nance Log on page 54 for details.
Condition Monitoring Configuration Tool Usage Guide (N240)
The logging settings differ depending on the model. See Section 5.
This function is available only for K7DD. See Section 6.
1 Common Settings
Home Screen (4)
Description
Home Screen (4)
Home Screen (4)
1
23