K6Cm/K7Ge/K7Tm Alarm Settings - Omron K6CM Usage Manual

4-1

K6CM/K7GE/K7TM Alarm Settings

The alarm settings for the following models are described here.
• K6CM-series (K6CM-CI2, K6CM-IS and K6CM-VB)
• K7GE
• K7TM
Alarm Settings for K6CM/K7GE/K7TM
Set alarm values to detect abnormalities. Make sure the settings on the Tool match those of the
condition monitoring device. If the alarm values are already set on the condition monitoring device, read
them from the condition monitoring device and apply to the Tool.
This is the Alarm Settings Screen.
1
Set the alarm values for the dis-
played parameters on the screen.
2
The Complete Button is enabled for
clicking when the reading or writing
is successfully completed.
Click the Complete Button to go to
the next screen.
Condition Monitoring Device name
K6CM-CI2 Comprehensive Current Diagnosis
Type
K6CM-VB Vibration & Temperature Type
K6CM-IS Insulation Resistance Type
K7GE-MG Insulation Resistance Monitoring
Device
K7TM-A2M Heater Condition Monitoring Device
*1. Automatic calculation is possible using Acceleration alarm, speed alarm threshold setting guide.
For details on setting parameters, hover your mouse over the "i" mark on the screen to display hints
and instructions. Set the parameters according to those instructions.
Condition Monitoring Configuration Tool Usage Guide (N240)
K6CM-CI2 Alarm Settings example
Setting Parameter
Current failure warning threshold
Current failure critical threshold
Degradation level 1 failure warning
Degradation level 1 failure critical
Degradation level 2 failure warning
Degradation level 2 failure critical
Acceleration failure warning *1
Acceleration failure critical *1
Velocity failure warning *1
Velocity failure critical *1
Motor temperature failure warning
Motor temperature failure critical
Temperature gap failure warning
Temperature gap failure critical
Insulation resistance failure warning
Insulation resistance failure critical
Alarm Value 1
Alarm Value 2
Heater Deterioration Alarm Value (Warning)
Heater Deterioration Alarm Value (Critical)
Last Resistance Value Change Rate Alarm Value
Heater Burnout Alarm Value (Voltage)
Heater Burnout Alarm Value (Current)
4 Alarm Settings
4
41