Communication Settings (Home Screen (2)) - Omron K6CM Usage Manual

1-3 Communication Settings (Home
Screen (2))
The Basic Settings consists of the following three items. You can set it on the Home Screen (2).
Settings Item
Communication Settings
Initial Settings
Trigger Settings *1
*1. The setting name differs depending on the model.
How to Make Communication Settings
1
Click Basic Settings on the Home
Screen (2).
The Communication Settings Dia-
log Box is displayed.
Before setting up communications,
turn on the power of the condition
monitoring device.
You need to set the IP address of your computer to the same network as the target communication
IP address, to use the Tool. Refer to the 4-3 IP Address Setting in the K6CM User's Manual (N219)
as a setting example.
*1. For K6CM and K6PM, set the IP address of each condition monitoring device itself. For
Condition Monitoring Configuration Tool Usage Guide (N240)
The procedure for communications settings differs between models starting with the
prefix K6 and models starting with K7. See this Section.
The Initial Settings differ depending on the model. See Section 2.
The Trigger Settings depends on the model. See Section 2.
K7GE, K7TM, and K7DD, set the IP address of the communication converter. Refer to the
communication converter instruction manual for details.
1 Common Settings
Description
Home Screen (2)
1
17