K6Cm Logging - Omron K6CM Usage Manual

5-1

K6CM Logging

The Logging Screen for K6CM is described below.
K6CM Logging Screen
The content of the Logging Screen for the K6CM series (K6CM-CI2, K6CM-IS, or K6CM-VB) is
provided below.
For illustrative purposes, the following screen shows the logging of K6CM-CI2.
Area
A Logging Interval
B Logging Target Data
*1. When the logging interval is set to None, the Tool immediately acquires the next set of data once the current
cycle of data acquisition is completed.
Icon
*1. If both critical and warning alarms turn to 1 (ON), the critical level icon will be displayed.
Condition Monitoring Configuration Tool Usage Guide (N240)
A
Item
None*1, 5 seconds, 1 minute, 10 minutes, or 1 hour
The data that can be logged differs for each K6CM series.
Refer to the K6CM User's Manual (N219) for details on the status.
Critical
This is displayed when one of the alarm results (critical) is 1 (ON) in the latest log data.
Warning
This is displayed when one of the alarm results (warning) is 1 (ON) in the latest log data.*1
Communications Error
This is displayed in the following cases:
• When the logging time times out
• When an error response is received
B
Description
Description
5 Logging
5
49