Omron K6CM Usage Manual page 39

*1. Use the Get from File Button when accessing to use previously acquired data.
Data file names are created according to the following rules:
Normal data: Normal_yyyy-MMdd-HHmmss.csv
Abnormal data: Abnormal_yyyy-MMdd-HHmmss.csv
 Registration of Abnormal Data
Next, start registering abnormal data.
The following options are available for
abnormal data:
• Machine Condition Data (Abnormal)
• Values Memorized in Monitoring Device
*1
• Application Setting File *2
The procedure is given below for the case
in which the Machine Condition Data
(Abnormal) is selected.
3
Operates equipment to be moni-
tored where a state of abnormality
has been intentionally created.
4
Click the Get from Monitoring
Device Button.
The abnormal data is registered.
A pop-up window appears, display-
ing the message Monitoring Device
is collecting Machine Condition
Data, the same as the one shown
during the registration of normal
data.
Wait till the Data Registration
Screen is displayed again.
5
When the registration of normal
data and abnormal data is com-
pleted, the Next Button is enabled.
Click the Button to go to the next
screen.
*1. Refer to 2-3-2 To capture sudden errors of K7DD User's Manual (N233) for details.
The file created for "Values Memorized in Monitoring Device" is as follows:
File name: MaxMin.csv
*2. Refer to 2-3-1 Settings with Application Setting File of K7DD User's Manual (N233) for details.
Condition Monitoring Configuration Tool Usage Guide (N240)
3 Features Analysis
Features Analysis - Data Registration
3
37