Logging - Omron K6CM Usage Manual

5. Logging

In this section, explanations for the
Logging Screen are provided. The
content primarily includes information
that cannot be inferred from the Tool
screen.
The logging function is used for a tem-
porary check to confirm whether the
alarm values are within an appropriate
range. If you want to collect measure-
ment data over a long-term monitor-
ing, build a system that suits your
application.
*1. Logging is possible after completing the basic settings; however, note that since the alarm settings are not yet
made, red and yellow lines indicating alarm values are not displayed on the graph in the Trend Monitor.
Common Part
The screen common to the logging function of each condition monitoring device is described. The
screen shown below can be displayed by clicking the Logging Button on the Home Screen (4).
Condition Monitoring Configuration Tool Usage Guide (N240)
Parts described in Section 5 Logging.
Home Screen (1)
Home
Screen (2)
2. Basic
Settings
Home
Screen (3)
*1
Home
5. Logging
Screen (4)
6. Digital Maintenance
A
Trend Monitor
Start up Screen
AddMachineAndMonitoringDevice
1. Add
BasicSettings
AlarmSettings
3. Features
BasicSettings
AlarmSettings
BasicSettings
4. Alarm
AlarmSettings
Log
* K7DD only
B
Logging
Target Data
5 Logging
Monitoring
Device
Analysis
* K7DD only
Settings
5
C
47