Alarm Settings - Omron K6CM Usage Manual

4 Alarm Settings

4. Alarm Settings
In this section, explanations for Alarm
Settings Screen are provided. The
content primarily includes information
that cannot be inferred from the Tool
screen.
Although the setting screens for each
condition monitoring device are differ-
ent, the alarm settings for K6CM,
K7GE, and K7TM are described
together.
The alarm settings for K6PM and
K7DD are explained separately, as
their settings are different from those
of other models.
Common Part
The Buttons in the common section of the Alarm Settings for each condition monitoring device are
described below.
Area Button name
Set Default Value
Read
A
Write
Back
B
Next
40
2. Basic
Settings
5. Logging
A
Sets the default values for the displayed setting items.
Reads the current setting values from the condition monitoring device and
applies them to the setting items.
The Read Button can be used if you have already configured the condition
monitoring device using the operation keys.
Writes the configured setting items to the target condition monitoring device.
Back to the previous screen.
The Button is enabled for clicking when the reading or writing is successfully
completed or when the settings for the screen are completed.
Parts described in Section 4 Alarm Settings.
Start up Screen
Home Screen (1)
AddMachineAndMonitoringDevice
Home
BasicSettings
Screen (2)
AlarmSettings
Home
BasicSettings
Screen (3)
AlarmSettings
Home
BasicSettings
Screen (4)
AlarmSettings
6. Digital Maintenance
Log
* K7DD only
B
Description
Condition Monitoring Configuration Tool Usage Guide (N240)
1. Add
Monitoring
Device
3. Features
Analysis
* K7DD only
4. Alarm
Settings