Maintenance - Omron HEM-RML30 Instructions For Use Manual

3.

Maintenance

This cuff fulfi ls the previsions of EC directive 93/42/EEC (Medical Device Directive).
Manufacturer
EU-representative
Production facility
Subsidiary
This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co., Ltd., JAPAN.
Taking measurements on the right arm
Apply the cuff so that the air tube is at the side of
your elbow.
• Be careful not to rest your arm on the air tube, or
otherwise restrict the fl ow of air to the cuff.
• The cuff should be 1 to 2 cm above the elbow.
3. When the cuff is positioned correctly, close the
fabric fastener FIRMLY.
• Stains on the cuff can be carefully removed using a
moist cloth and soapy water.
• Do not fold the cuff or air tube together too tightly
and do not crease them.
• Do not store the cuff in the following situations:
- If the cuff is wet.
- Locations exposed to extreme temperatures, hu-
midity, direct sunlight, dust or corrosive vapours.
- Locations exposed to vibrations, shocks or where
it will be at an angle.
OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko, Kyoto,
617-0002 JAPAN
OMRON HEALTHCARE EUROPE B.V.
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS
www.omron-healthcare.com
OMRON (DALIAN) CO., LTD
Dalian, CHINA
OMRON HEALTHCARE UK LTD.
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.
OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH
John-Deere-Str. 81a, 68163 Mannheim, GERMANY
www.omron-medizintechnik.de
OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, FRANCE
EN
Made in China
3