K7Dd Features Analysis - Omron K6CM Usage Manual

3 Features Analysis
3-1

K7DD Features Analysis

The feature analysis function is only available for K7DD. This function can analyze 400 types of fea-
tures from normal and abnormal data and can calculate the feature with the largest rate of change from
abnormal data. The Screen shown below can be displayed by clicking the Features Analysis for Alarm
Threshold Calculation on the Home Screen (3).
The Feature Analysis has the following three phases. Execute the Feature Analysis for each registered
abnormal data.
• Data Registration
• Features Selection
• Threshold Calculation
K7DD Data Registration
Register data for feature analysis. Run equipment to be monitored in actual operation and register two
waveform data sets: one for normal conditions and the other for abnormal conditions.
 Registration of normal data
This is the Data Registration Screen.
Start registration from normal data.
1
Operate equipment to be monitored.
2
Click the Get from Monitoring
Device Button when you register
normal data for the first time.*1
A pop-up window appears, display-
ing the message Monitoring Device
is collecting Machine Condition
Data.
• Wait for approximately 5 minutes,
a progress bar will be displayed,
indicating communication in prog-
ress.
• If the equipment is in constant
operation, you can reduce the
waiting time, approximately 5
minutes, by clicking the Finish
Collecting and Read Data But-
ton.
36
Features Analysis - Data Registration
Pop-up window for collecting machine condition data
Condition Monitoring Configuration Tool Usage Guide (N240)