Omron K6CM Usage Manual page 21

With the procedures above, the Communication Settings in the Basic Settings can be com-
pleted.
The Initial Settings and Trigger Settings*1 in the Basic Settings parameter for each condition
monitoring device are described in Section 2.
Refer to the respective page numbers for each model listed under (2) Basic Settings in the fig-
ure below.
*1 The setting name differs depending on the model.
Setting K6CM
Procedure -CI2
(1) Common
Settings
(2) Basic
Settings
(3) Features
Analysis
(4) Alarm
Settings
(5) Logging
(6) Digital
Maintenance
Log
Condition Monitoring Configuration Tool Usage Guide (N240)
K6CM K6CM
K6PM
-IS -VB
Creating a Project, Registrating Monitoring Device or Machine, and Communication Settings
Initial Settings,
Initial Settings,
Thermal Sensor
Trigger Settings
Settings
Section 2-1
Section 2-2
Alarm Values Temperature Failure
(Warning/Critical) Warning
Section 4-1 Section 4-2
K6CM Logging K6PM Logging
Section 5-1 Section 5-2
Setting Completed/Operation
K7GE K7TM
Initial Settings,
Initial Settings,
Reference Resistance
Trigger Settings
Value Registration
Section 2-3
Section 2-4
Alarm Values
(Warning/Critical)
Section 4-1
Common Part
Section 5
K7GE Logging K7TM Logging
Section 5-3 Section 5-4
1 Common Settings
K7DD
Initial Settings,
Trigger Settings
Section 2-5
Data Registration,
Parameter Calculation,
Calculates alarm
thresholds
Section 3
Alarm of parameter
Section 4-3
K7DD Logging
Section 5-5
Maintenance Log
Section 6
19
1