K6Pm Basic Settings - Omron K6CM Usage Manual

2 Basic Settings
2-2

K6PM Basic Settings

The Initial Settings and Infrared Thermal Sensor Settings in the Basic Settings are described below.
Refer to 1-3 Communication Settings (Home Screen (2)) for information on Communication Settings.
K6PM does not have Trigger Settings.
K6PM Initial Settings
This is the Initial Settings Screen in the Basic
Settings.
Setting parameters are as follows:
Thermal Condition Monitoring Device
K6PM-TH
For details on setting parameters, hover your mouse over the "i" mark on the screen to display hints
and instructions. Set the parameters according to those instructions.
K6PM Infrared Thermal Sensor Settings
Set the position of the infrared thermal sensor.
A list of sensor numbers connected to
K6PM is displayed on the Infrared Thermal
Sensor Settings Screen in the Basic
Settings. The sensor number is set using
the DIP switches on the side of the infrared
thermal sensor.
When communication is performed
normally, a check mark will appear in the
Connection, and the Setting Button will be
enabled.
1
Click the Setting Button.
Set the selected infrared thermal
sensor.
28
Initial Settings
Setting Parameter
Temperature Unit, Use Arrival Prediction, Alarm Latch, Output
Inversion, Use Running Time
Infrared Thermal Sensor Settings
Condition Monitoring Configuration Tool Usage Guide (N240)