K7Ge Basic Settings - Omron K6CM Usage Manual

2 Basic Settings
2-3

K7GE Basic Settings

The Initial Settings and Trigger Settings in the Basic Settings are described below. Refer to 1-3 Com-
munication Settings (Home Screen (2)) for information on Communication Settings.
K7GE Initial Settings
This is the Initial Settings Screen in the Basic
Settings.
Setting parameters are as follows:
Insulation Resistance Monitoring Device
K7GE-MG
For details on setting parameters, hover your mouse over the "i" mark on the screen to display hints
and instructions. Set the parameters according to those instructions.
30
Initial Settings
Setting Parameter
Maximum Number of Channels, Alarm Polarity, Use Running
Time, Setting Change Protection
Condition Monitoring Configuration Tool Usage Guide (N240)