Omron K6CM Usage Manual page 50

5 Logging
 Trend Monitor
The waveforms during logging are displayed in real-time. The displayed target data cannot be changed
throughout the logging session. When alarm values are set, warning levels are indicated by yellow
lines, and critical levels are indicated by red lines.
 Logging Target Data
Up to two features and two statuses can be selected and displayed for logging.
Set the icon "
Area
A Logging interval
B Pick Target Features
C Start or Stop
 How to save the logging files:
Logging files are saved by selecting Save Project from the File menu at the top left of the screen. Note
that they are not saved automatically.
48
" to " " (enabled) to the left of the features and statuses you intend to log.
Item
To set the logging interval. The setting range differs depending on the condition
monitoring device. Refer to the description for each model for the setting range.
This dropdown button is dedicated to K7DD. Select the feature to be logged
from the following three options.
• All features
• Feature analysis results
• Alarm setting
After making the selection above, a screen for feature selection is displayed,
allowing you to select individual features.
To start/stop logging.
Multiple connected condition monitoring devices can be logged. The names of
devices are displayed on the left. Click on any of the device names to display
logging details for the selected device in the Trend Monitor.
Description
Condition Monitoring Configuration Tool Usage Guide (N240)