Event Setup; Alarm-In; Figure 43 ─ Event Menu; Figure 44 ─ Alarm-In Settings Setup Screen - Eneo DLR-2004/500V Instruction Manual

NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings
and follows the time settings.

Event Setup

Alarm
-In
Highlight Alarm-In in the Event menu and press the
appears.
Figure 44 ─ Alarm-In Settings setup screen.
You can set up the DVR to start panic recording whenever it senses an input on one of its alarm
input connectors. Highlight the box beside Panic Record and press the
Alarm Inputs appears, and you can select which alarm input you want associated with panic
recording. The DVR will continue panic recording until an input on the selected alarm input is
released as long as the
Highlight the Actions tab, and the Alarm-In Actions setup screen appears.
Figure 43 ─ Event menu.
button is not pressed to stop the panic recording.
PANIC
4- & 8-Channel Digital Video Recorder
button. The Alarm-In setup screen
The alarm terminal strip on the back of the DVR
has inputs associated with each alarm. You can
set up each input on the Alarm-In screen. You
can turn each input On or Off by highlighting
the alarm number and pressing the
Each input can be given a title. Highlight the
desired Title box and press the
virtual keyboard appears allowing you to enter
a title name.
Each input can be set as NO (normally open) or
NC (normally closed).
button.
button. A
button. A list of
41