Table of Contents
Advertisement
User's Manual
In active cameo mode, press the button for the camera you want to display in the active cameo.
After setting the camera number to active cameo, the DVR moves the active cameo to the next
cameo. When the camera number exists on the current screen, the active cameo is changed with
the existing camera number. When the camera number does not exist on the current screen, the
active cameo is replaced by the camera number. You can change the screen layout in this way.
Zoom Mode
You can enlarge an area of the video by selecting Zoom from the Camera Menu in the Live
Monitoring menu or pressing the
Zoom from the Camera Menu or pressing the
A rectangle shows the area that will be enlarged. You can move the rectangle around using the
arrow buttons. Pressing the
rectangle. Exit the Zoom mode by selecting Zoom again from the Camera Menu or pressing the
button again. While in the Zoom mode, the icon
ZOOM
Display setup screen (OSD tab).
Event Monitoring
When an event occurs, the DVR will display the camera associated with the event if Event
Monitoring On is selected in the Display setup screen (Main Monitor tab).
How the cameras are displayed depends on the number of cameras associated with the event. If
one camera is associated with the event, the DVR will display the camera full screen. If two to
four cameras are associated with the event, the DVR will display the cameras on a 2x2 screen. If
five to eight cameras are associated with the event, the DVR will display the cameras on a 1+5,
1+7 or 3x3 screen.
Event monitoring lasts for the dwell time set for event recording. After the dwell time has elapsed,
the monitor returns to the previous screen unless another event has occurred. If you want to return
to the live monitoring mode before the dwell time has elapsed, press one of the camera buttons.
Covert Camera
If a camera is set up as Covert 1 in the Camera setup screen (Settings tab), that camera will not
be displayed unless a user with Covert Camera View authority logs into the system. However
the camera title and status icons will be displayed on the monitor.
If a camera is set up as Covert 2 in the Camera setup screen (Settings tab), that camera appears
to be Off unless a user with Covert Camera View authority logs into the system. The camera
title will be grayed out and status icons will not be displayed on the monitor.
NOTE: When a camera is set up as Covert 1, the DVR displays the camera title and status
icons on the covert video. When set up as Covert 2, the DVR displays only the camera title
on the covert video.
If a user who has Covert Camera View authority logs into the system, the user can view video
from cameras set to Covert 1 or Covert 2 including the camera titles and status icons.
56
button on the front panel. For a few seconds after selecting
ZOOM
ZOOM
(Play/Pause) button in the Zoom mode enlarges the area in
button, a rectangle displays on the screen.
displays if Zoom is selected in the
Advertisement
Table of Contents
