Table of Contents
Advertisement
Error Code Notices
System Upgrade Related
No.
0
Unknown error.
1
File version error.
2
Operating system version error.
3
Software version error.
4
Kernel version error.
100
Upgrade device mounting failed.
101
Package is not found.
102
Extracting package failed.
103
LILO failed.
104
Rebooting failed.
105
Invalid package.
300
Remote connection failed.
301
Remote network error.
302
Remote upgrade is not authorized.
303
Saving remote package failed.
304
Remote upgrade is cancelled by the user.
400
USB device mounting failed.
Reading upgrade package on the USB
401
device failed.
Copying upgrade package on the USB
402
device failed.
500
System is busy clip copying.
Troubleshooting
Problem
No Power
No Live Video
DVR has stopped
recording
The icon
displays,
however, the DVR is not
recording.
Description
Check power cord connections.
Confirm that there is power at the outlet.
Check camera video cable and connections.
Check monitor video cable and connections.
Confirm that the camera has power.
Check camera lens settings.
If hard disk drive is full, you will either need to delete video or set
the DVR to the Overwrite Mode.
When the DVR is in the Pre-Event recording mode, the yellow
and
display when there is no event, and the DVR is not recording.
The red
and
recording.
4- & 8-Channel Digital Video Recorder
Clip Copy Related
No.
0
Unknown error.
1
Device error.
2
Mounting failed.
3
No media.
4
Invalid media.
5
File already existed.
6
Not enough space.
7
Creating temporary file failed.
8
Opening disk failed.
9
Formatting disk failed.
10
Database has been changed.
11
Appending failed.
12
Bad sector.
13
No executable file.
14
Opening executable file failed.
15
Writing executable file failed.
16
Creating image failed.
Possible Solution
display when any event occurs and the DVR starts
Description
79
Advertisement
Table of Contents
