Table of Contents
Advertisement
Chapter 2 ─ Installation
Package Contents
The package contains the following:
Digital Video Recorder
Power Adaptor and Power Cord
User's Manual (This Document)
RAS Software CD and User's Manual
Infrared Remote Control
Required Installation Tools
No special tools are required to install the DVR. Refer to the installation manuals for the other
items that make up part of your system.
Video Input
Network Port
RS232 Port
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL
camera and an NTSC monitor.
Video Input
Figure 2 ─ 8-Channel DVR rear panel.
Factory Reset Switch
Alarm Input/Output
Power Cord Connector
Connect the coaxial cables from the video sources to the BNC Video
In connectors.
4- & 8-Channel Digital Video Recorder
Video Out
RS485 Port
3
Advertisement
Table of Contents
