Table of Contents
Advertisement
User's Manual
Highlight the box beside Notify and press the
Off by highlighting Notification and pressing the
On and Off by highlighting that item and pressing the
button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification
setup screen and the DVR should be registered in the RAS (Remote Administration System).
Highlight the desired box under the PTZ heading, and press the
appear. Select the preset positions for each PTZ camera, where you want PTZ cameras to move
to when the DVR detects text input.
System Event
Highlight System Event in the Event menu and press the
screen appears.
Figure 55 ─ Health Check setup screen.
Highlighting the box under the Interval heading beside each alarm-in and pressing the
allows you to change the interval that you want the DVR to run self-diagnostics on Alarm Inputs.
You can select from 1 hr. to 30 days or Never.
50
button. You can toggle the entire list On and
button. You can toggle the individual items
The DVR can be configured to run self-
diagnostics and report the results.
Highlighting the box beside System and
pressing the
the interval that you want the DVR to run self-
diagnostics on the system. You can select from
1 hr. to 30 days or Never.
Highlight the Setup... box beside Check Recording and
button. The Check Recording screen
press the
appears.
Highlighting Schedule On and pressing the
toggles On and Off. When set to On, you can select the day,
time range and interval that you want the DVR to run self-
diagnostics on the recorder. The Interval can be selectable
from 1 min. to 7 days or Never. The
to delete a check recording schedule.
button. Highlight OK and press the
button. A list of PTZ presets
button. The System Event setup
button allows you to select
button
box allows you
button
Advertisement
Table of Contents
