Table of Contents
Advertisement
In the live monitoring mode, pressing and holding the
longer enters the PTZ mode, and pressing and holding the button again for three seconds or longer
exits the PTZ mode. When in the PTZ mode, pressing the arrow buttons or
you to control properly configured cameras.
Panic Button
Pressing the
PANIC
screen. Pressing the button again will stop panic recording.
Search Button
Pressing the
SEARCH
mode. When entering the search mode, video is paused. Pressing the
plays back video at regular speed. The screen displays when the DVR is in the Pause mode and
the screen displays when the DVR is playing back video. The button is also used to load a Preset
View in the PTZ mode.
USB Port
A USB port on the front panel is provided to connect external hard disk or flash drives for video
clip copying or system upgrades. Position external drives close enough to the DVR so that you
can make the cable connections, usually less than 6 feet. Use the USB cable provided with the
hard disk drive to connect it to the DVR.
A USB mouse (not supplied) can be connected to the USB port. You can use the mouse to navigate
through the screens and menus much like you would on a computer.
A USB to Serial converter can be connected to the USB port. Multiple text-in devices can be used
with a USB to Serial converter.
button starts panic recoding of all camera channels, and displays
button enters the search mode, and pressing the button again exits the search
4- & 8-Channel Digital Video Recorder
button for three seconds or
PTZ/ZOOM
button allows
MENU
on the
(Play/Pause) button
9
Advertisement
Table of Contents
