Figure 34 ─ Main Monitor Setup Screen; Figure 35 ─ Vga Setup Screen - Eneo DLR-2004/500V Instruction Manual

Figure 34 ─ Main Monitor setup screen.
NOTE: Any cameras that are Off, have lost video or are set to Covert (unless the user has
authority to view covert cameras) will be excluded from the Cameo sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through the
different screen layouts (pages) so that all the cameras will be displayed. You can also set up the
DVR to display one camera or a group of cameras all the time while cycling through the remaining
cameras in a "cameo" window. This can be done with one camera displayed full screen while
displaying the cameo window as a PIP (picture in picture), or displaying the cameras in a grid
pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 3x3 and 1+7 modes of the 8-channel DVR, and 2x2
mode of the 4-channel DVR.
You can adjust the display dwell time by highlighting the box beside Interval and pressing the
button. You can select dwell intervals ranging from 1 second to 1 minute.
Highlight Event Monitoring On and press the
between On and Off. When it is On, the DVR will display the camera associated with the event
when an event occurs.
Highlight the VGA tab, and the VGA setup screen appears.
Figure 35 ─ VGA setup screen.
4- & 8-Channel Digital Video Recorder
Highlight the box beside Mode and press the
button. You can select between Full
Sequence and Cameo Sequence. (8-ch Model
Only)
Pressing the
MENU
for three seconds or longer or the
button on the remote control causes the DVR to
sequence cameras, and the DVR can sequence
cameras in two modes: "Full" and "Cameo".
In the Full mode, the DVR sequences through
the cameras and displays them full screen. In
the Cameo mode, the bottom right window in
a multi-screen format sequences through the
cameras.
button. Pressing the
Highlight the box beside Resolution and press
the button. You can select from 800x600,
1024x768 and 1280x1024.
Highlight the box Test box and press the
button to test how the screen will be displayed
with the resolution you set.
button on the front panel
SEQUENCE
button toggles
35