Table of Contents
Advertisement
Highlighting the + and pressing the
parameter. Set up the desired search parameter. Refer to the Appendix – Text-In Search
Examples for further information on setting up search parameters. The
delete a set of search parameter or entire sets of search parameters.
Highlight Case Sensitive and press the
this feature is On, the search will find only those text strings in which the case matches.
Highlight Load and press the
search option settings.
Highlight Save and press the
keyboard appears that you can use to enter the search option name.
Once you set your desired search conditions, highlight Search and press the
the search results in the Text-In Search screen. Selecting Cancel exits the screen without saving
the changes.
Clip-Copy
Video clips can be copied on an external USB hard disk or flash drive. The copied video clips
can be viewed on computers running Microsoft Windows 98, ME, 2000, XP or Vista. Refer to
the Appendix – USB Hard Disk Drive Preparation for information on preparing the external drive
for clip copy.
Selecting A-B Clip-Copy from the Export menu in the Search menu or pressing the
button on the remote control during playback will set the starting point of the video to be clip
copied, and the
icon displays at the bottom-left corner of the screen. Selecting A-B Clip-Copy
again from the Export menu in the Search menu or pressing the
the ending point of the video to be clip copied by displaying the Clip-Copy screen.
Select Clip-Copy from the Export menu in the Search menu, press the
remote control while in the Live Monitoring mode or press and hold the
than three seconds while in the Search mode, and the Clip-Copy screen appears to allow clip copy
setup.
Figure 68 ─ Clip-Copy screen.
Highlight the box beside Channels and press the
you would like to include in your video clip.
button allows you to add a new set of search
button. This will toggle between On and Off. When
button to load saved search option settings. Select the desired
button to save the current search option settings. A virtual
You can search video from the first to last recorded
images, or you can set the start and stop times and dates.
Highlight the box beside From and press the
Pause) button to toggle between On and Off. When set
to Off, you can enter a specific Date and Time. When
set to On, the search will be from the first recorded image.
Highlight the box beside To and press the
to toggle between On and Off. When set to Off, you can
enter a specific Date and Time. When set to On, the search
will be from the last recorded image.
4- & 8-Channel Digital Video Recorder
column can be used to
BACK UP
BACK UP
BACK UP
button. You can select the cameras that
button to display
BACK UP
button again will set
button on the
button for more
(Play/
button
69
Advertisement
Table of Contents
