Table of Contents
Advertisement
User's Manual
Figure 45 ─ Alarm-In Actions setup screen.
Highlight the desired box under the Alarm-Out heading, and press the
Alarm Output and Beep (DVR's internal buzzer) that you would like to activate and to sound
whenever the DVR detects an input on the associated alarm input.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the desired box under the Notify heading, and press the
Notify menu appears.
Highlight the desired box under the PTZ heading, and press the
appear. Select the preset position for each PTZ camera, where you want PTZ cameras to move
to whenever the DVR detects an input on the associated alarm input.
42
You can toggle the entire list On and Off by highlighting Notification
and pressing the
On and Off by highlighting that item and pressing the
Highlight OK and press the
NOTE: For the Notify action, the notify item you select should
be enabled in the Notification setup screen and the DVR should
be registered in the RAS (Remote Administration System).
You can set the actions the DVR will take
whenever it senses an input on one of its alarm
input connectors.
Highlight the desired box under the Record
heading, and press the
cameras appears. Select the cameras that you
want the DVR to record whenever it detects an
input on the associated alarm input.
NOTE: For the Record action, the camera
you select should be set to the Event or
Time & Event recording mode in the Record
Schedule setup screen.
button. You can toggle the individual items
button to accept your changes.
button. A list of PTZ presets
button. A list of
button. Select between
button. The Alarm-In
button.
Advertisement
Table of Contents
