Table of Contents
Advertisement
Highlight the first box beside Time and press the
will highlight. Use the Up and Down arrow buttons to change the number. Use the Left and Right
arrow buttons to move between hour, minutes and seconds. Once you have the correct time, press
the
button.
Highlight the Format box beside Time and press the
time formats and press the
NOTE: The clock will not start running until you have highlighted Save and pressed the
button.
Highlight the box beside Time Zone and press the
list and press the
Highlight Enable Daylight Saving Time and press the
toggles between On and Off.
Highlight the Holiday tab, and the Holiday setup screen appears.
Figure 11 ─ Holiday setup screen.
Highlighting the Time Sync. tab causes the Time Sync. setup screen to display. You can set
up time synchronization between the DVR and standard time servers that are available in most
time zones and countries, or between the DVR and another DVR.
Figure 12 ─ Time Sync. setup screen.
button to save your selected format.
button.
4- & 8-Channel Digital Video Recorder
button. The individual sections of the time
button. Select from the three available
button. Select your time zone from the
button. Pressing the
You can set up holidays by highlighting + and
pressing the
button. The current date
appears.
Highlight the month and day and change them
by using the Up and Down arrow buttons. Press
the
button to add the date. Dates can be
deleted by highlighting the
and pressing the
NOTE: Holidays that do not fall on the same
date each year should be updated once the
current year's holiday has passed.
Highlight the box beside Automatic Sync. and
press the
button. This toggles between On
and Off.
Highlight the box beside Time Server and press
the
button. A virtual keyboard appears that
you can use to enter the IP address or domain
name of the time server.
NOTE: You can use the domain name
instead of IP address if you already set up
the DNS Server when setting up the LAN.
button
beside the date
button.
17
Advertisement
Table of Contents
