Table of Contents
Advertisement
User's Manual
⑥
Click the camera button to select the camera to be viewed.
⑦
Click the
to adjust the brightness, contrast, saturation and hue of monitoring image.
⑧
Click the
to control pan, tilt and zoom of the camera from a remote site.
⑨
Click the
to control alarm out devices at the remote site.
⑩
Click the
to set up the image drawing mode and OSD display. You can adjust the display
speed by changing the image drawing mode, and select OSD information to be displayed on
the screen.
⑪
Click the
to save the current image as a bitmap or JPEG file format.
⑫
The event status window at the bottom displays a list of events that were detected from the
remote site.
⑬
Selecting a camera on the screen and clicking the right mouse button displays the text menu
screen.
NOTE: A camera name change in the Web Watch mode does not affect the camera name
set up on the remote site. Leaving the Camera Title blank causes the camera name set up
on the remote site to display.
Web Search Mode
WebSearch is a remote web search program that allows you to search recorded video on the remote
DVR.
NOTE: The remote site connection in the Web Search mode will automatically be
disconnected if there is no activity for 30 minutes.
76
Change Camera Title: Changes the camera name.
Aspect Ratio: Changes the image aspect ratio.
Deinterlacing: Using a deinterlace filter for interlaced video enhances image
display quality by eliminating horizontal scan lines and noise in areas with motion.
Anti-Aliasing Screen: Enhances image display quality by eliminating stair
stepping (aliasing) effects in the enlarged image.
Advertisement
Table of Contents
