User's Manual
PTZ Button
Pressing the
button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly
PTZ
configured cameras.
Enter Button
The
(Enter) button selects a highlighted item or completes an entry that you have made during
system setup. This button is also used to enter the Cameo mode in the Live Monitoring mode or
Search mode (8-ch Model Only).
Alarm Button
Pressing the
ALARM
PTZ Control Buttons
While in the PTZ mode, the
buttons are used to Zoom In and Zoom Out, and the
ZOOM
Focus and Far Focus.
Back Up Button
Pressing the
BACK UP
Calendar Button
In the search mode, pressing the
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds
to initialize.
Initial Unit Setup
Before using your DVR for the first time, you will want to establish the initial settings. This
includes items such as time and date, display language, camera, remote control, record mode,
network and password. Your DVR can be set up using various screens and dialog boxes.
Throughout the screens you will see
button gives you the opportunity to reset that screen to its default settings. After you are finished
with any setup screen, you can highlight Save and press the
exit the screen. If you do not wish to save the changes, highlight Cancel and press the
to exit the screen.
12
button resets the DVR's outputs including the internal buzzer during an alarm.
buttons are used to save Presets and load a Preset View, the
PRESET
button allows you to copy video clips.
CALENDAR
. Highlighting the
FOCUS
button displays the Calendar Search screen.
and pressing the
button to save the changes and
buttons are used for Near
(Play/Pause)
button