Table of Contents
Advertisement
User's Manual
Special characters can be created using ^ and a capital letter; e.g. ^J for NL (New Line), ^M for
CR (Carriage Return). Special characters are commonly used by text input devices and will be
useful when performing Text-In Searches.
System Setup
Information
Highlight Information in the System menu and press the
appears.
Figure 9 ─ Information setup screen.
Highlight the box beside System ID and press the
it and using the Up and Down arrow buttons to increase and decrease the number from 0 to 99.
NOTE: The System ID number is used to identify the unit when it is connected with other
DVRs through the RS485 port. You cannot use the same ID number for two or more DVRs
that are in the same RS485 network. It is possible to have multiple DVRs with System ID
0 that are in the same area as long as they are not part of an RS485 network. If this is the
case, all will be controlled at the same time when using the infrared remote control.
14
Use the arrow keys to highlight the character you want in the name or
title and press the
bar and the cursor moves to the next position. Pressing
between the upper and lower case keyboards,
deletes entered characters. You can use up to 31 characters including
spaces in your title.
Figure 8 ─ System menu.
button. That character appears in the title
button. The Information setup screen
In the Information screen, you can name the
site location, assign a System ID number, select
the language the screens are displayed in, display
software version number, upgrade the software,
show the System Log, display recorded time
data, and clear all data.
Highlight the Site box and press the
A virtual keyboard appears that you can use to
enter a Site Name. Once you have entered your
title, highlight Close and press the
button. Change the number by highlighting
toggles
backspaces, and
button.
button.
Advertisement
Table of Contents
