Notification; Figure 25 ─ Webguard Setup Screen; Figure 26 ─ Notification Mail Setup Screen - Eneo DLR-2004/500V Instruction Manual

User's Manual
Highlight the WebGuard tab, and the WebGuard setup screen displays.
Figure 25 ─ WebGuard setup screen.

Notification

The DVR can be set up to send an email or to contact a computer running RAS (Remote
Administration System) when an event occurs.
Highlight Notification in the Network menu and press the
screen displays. You will be able to change the Mail and Callback settings.
Figure 26 ─ Notification Mail setup screen.
NOTE: You can use the domain name instead of IP address if you already set up the DNS
Server when setting up the LAN.
Highlight the box beside Port and press the
Server port number obtained from your system administrator. The default port number is 25.
Highlight Enable SSL/TLS and press the
is On, the DVR can send an email via an SMTP server requiring SSL (Secure Sockets Layer)
authentication.
30
Highlight Enable WebGuard Service and
press the button to toggle between On and
Off. See Appendix – WebGuard for detailed
descriptions of the WebGuard service.
Highlight the box beside Port and press the
button. Set the port number used when
accessing WebGuard by using the Up and Down
arrow buttons to increase or decrease the
numbers.
button. The Notification setup
Highlight Enable and press the
to toggle between On and Off. You will only
be able to change the settings if Mail is enabled.
Highlight the box beside SMTP Server and
press the button. A virtual keyboard
appears that you can use to enter the IP address
or domain name of the SMTP server.
NOTE: You will need to get the IP Address
or domain name of the SMTP Server from
your network administrator.
button. Use the arrow buttons to enter the SMTP
button to toggle between On and Off. When it
button