Table of Contents
Advertisement
User's Manual
Figure 52 ─ Text-In Settings setup screen.
Figure 53 ─ Text-In Device setup screen.
Highlight Setup..., and press the
settings when configuring the RS232, RS485, USB-Serial or LAN ports.
Highlight the box beside Text-In Product, and press the
the list.
NOTE: The following description is for a Generic Text Device. The screen changes for
different types of text input devices, and there will be different parameter boxes for you to
enter information.
Highlight the box beside Transaction Start, and press the
to enter the Transaction Start string. Refer to the device manufacturer's documentation for the
text string that the device first sends when a transaction starts.
If you want the DVR to react to any character sent from the text input device, you will want to
turn On Any Character. Highlight Any Character, and press the
On and Off.
NOTE: If Any Character is turned On, you will not be able to enter any text in the Transaction
Start box.
48
The DVR can be set to react to text input from
devices such as ATMs (Automated Teller
Machines) and POS (Point of Sale; i.e., cash
registers). This screen allows you to configure
the DVR for each text-in device.
Highlight the box under the Setup heading, and
press the
heading changes all the parameters excluding
Port settings of all the text input channels.
NOTE: The system performance might be
affected when a large quantity of text inputs
are detected from several channels at the
same time.
Highlight the box beside Port, and press the
button. Select from None, RS232, RS485, USB-
Serial (1~8) and LAN (1~8).
NOTE: If you have set the Port as None, you
will not be able to make any changes to the
screen.
NOTE: When using the USB to serial text-in
device, do NOT remove the USB cable from
the port while the system is running.
button. Use the ATM or POS manufacturer's recommended
button. Selecting the Setup
button. Select your device from
button. Use the virtual keyboard
button to toggle between
Advertisement
Table of Contents
