Transportation, Storage And Disposal - Husqvarna DXR 95 Operator's Manual

Fault code number
2102-2123
2198-2199
2302-2323
2398-2399
3103
9101-9199
9301-9399
9501-9506
8101-8107
Pop-up fault codes and descriptions
Fault code
Machine timeout.
Remote battery yellow.
Remote battery red.
Machine stop activated.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
WARNING:
during transportation (DXR 95). Refer to
do a check of the rotation lock (DXR 95) on
page 37 .
1401 - 005 - 11.01.2024
Message in the dis-
play
"Remote control re-
ceiver Faulty"
"Receiver CAN inter-
face communication
not working"
Message in the display
Radio connection lost.
Battery low.
Battery empty.
Machine stop activated.

Transportation, storage and disposal

Be careful during
Engage the swing lock
Cause
There is a fault in radio communi-
cation receiver on the product.
There is an error with the CAN
bus cable between the radio
communication receiver and the
product. It can also be an internal
error.
Solution
Get in range and turn on the machine.
Repace with a charged battery soon.
Repace with a charged battery or use a cable.
Reset the machine stop button to continue oper-
ation.
The caterpillar tracks let you move the product shorter
distances. For longer distances, put the product on a
transportation vehicle.
• Use approved lifting equipment to attach and lift
heavy product parts.
• Always use all lifting eyes on the product when you
lift the product.
• Lift the product slowly and carefully. If the product
starts to tilt, use an alternative lifting equipment or
To
change the position of the arm system.
• Disconnect the product from the power supply before
transportation.
• Make sure that the parts of the product are not
damaged when you lift the product.
Solution
Speak to Husqvarna service.
Do a check of the product. If the
problem stays, speak to Husq-
varna service.
139