Husqvarna DXR 95 Operator's Manual page 105

4. Remove the air filter.
5. Install a new air filter.
To do a check of the oil level in the
slew motor (DXR 275, DXR 305, DXR
315)
1. Park the product on level ground and stop the
To stop the product (DXR 275,
product. Refer to
DXR 305, DXR 315) on page 84 .
2. Clean the area around the dipstick for the slew motor
to prevent contamination of the system.
1401 - 005 - 11.01.2024
3. Remove the dipstick (A).
4. Clean the oil from the dipstick.
5. Put the dipstick back in and tighten it.
6. Remove the dipstick again and read the oil level.
The oil level is correct when it is between the "Max."
and "Min." marks on the dipstick.
MAX
MIN
7. If the oil level is low, fill the oil through the hole for
the dipstick. Fill the oil slowly. Refer to
data on page 143 .
8. Do a check of the oil level again.
A
Technical
105