Transportation, Storage And Disposal - Husqvarna PG 830 Propane Operator's Manual

Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
The wheels let you move the product shorter distances.
For longer distances, lift the product to move it or put the
product on a vehicle.
CAUTION:
behind a vehicle.
• Be very careful when you move the product
manually or on surfaces with a slope. Small slopes
can result in a fast movement that is not possible to
brake by hand.
• Safety the product during transportation. Make sure
that it cannot move.
• Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
• Always use the lifting eye on the product when you
lift the product.
• Do not lift the product by the handlebar, engine,
chassis or other parts.
• Transportation is best done on a pallet.
• Always lift the product with a lift or forklift.
• Do not use a forklift if the product is not put on a
pallet or carriage. This can cause damage to the
grinding discs and other internal components.
• During transportation, the grinding head must be
on the ground. To prevent damage to the lock
mechanism of the tool plates, keep the tool plates
installed.
To set the product in transport position
• Fold down the handle. Refer to
and the handlebar on page 15 .
2023 - 003 - 04.04.2023

Transportation, storage and disposal

Be careful during
Do not tow the product
To adjust the handle
• If the weights are attached to the product, adjust the
weights to forward position. Refer to
weights on page 18 .
• Make sure that the grinding head touches the
surface.
To move the product up and down a
ramp
WARNING:
move the product up and down ramps. The
product is heavy and there is a risk of injury
if the product falls or moves too quickly.
WARNING:
slope, always use a winch. Do not walk or
stay below the product. Do not stay in the
product risk area. Refer to
on page 9 .
• To move the product down a ramp, operate the
product rearward slowly.
• To move the product up a ramp, operate the product
forward slowly.
• Do not turn the product more than 45° on a ramp.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product. Keep bystanders
away from the risk area. Refer to
safety on page 9 .
WARNING:
product. Make sure that the lifting eye is
correctly installed and not damaged.
1. Set the product in transport position. Refer to
the product in transport position on page 27 .
To adjust the
Be very careful when you
For ramps with a steep
Work area safety
Make sure that the lifting
Do not walk or stay below
Work area
Do not lift a damaged
To set
27