Husqvarna DXR 95 Operator's Manual page 125

4. Replace blown fuses. Refer to the decal (E) and
Fuse overview on page 126 .
Note:
(F) is Fuse F1, (G) is Fuse F2-F8.
5. Close the cover of the electrical enclosure and install
the 4 screws.
6. Install the rear cover and the 4 screws.
To replace a fuse (DXR 145)
WARNING:
serious injury and death. Read the safety
instructions in this manual carefully and
make sure that you understand the
instructions before you do servicing on the
product.
1. Stop the product and disconnect the power cord.
To stop the product (DXR 145) on page 83 .
Refer to
2. Open the cover of the electrical enclosure.
1401 - 005 - 11.01.2024
F
E
G
Electricity can cause
3. Replace blown fuses. Refer to the decal (C) and
Fuse overview on page 126 .
A
B
Note:
(A) is Fuse F2-F8, (B) is Fuse F1.
4. Close the cover of the electrical enclosure.
To replace a fuse (DXR 275, DXR 305,
DXR 315)
WARNING:
serious injury and death. Read the safety
instructions in this manual carefully and
make sure you understand the instructions
you do servicing on the product.
1. Stop the product and disconnect the power cord.
To stop the product (DXR 275, DXR 305,
Refer to
DXR 315) on page 84 .
2. Open the cover of the electrical enclosure.
C
Electricity can cause
125