Husqvarna DXR 95 Operator's Manual page 49

Menu overview (DXR 145, DXR 275, DXR 305, DXR 315)
Joystick setup
Calibrate hydraulics
Control diagnostics
Auto
Manual
Boom pressure
Factory reset
Pattern
Side switch setup
Precision
Factory reset
"Tools" menu
Tools
Machine status
Functions
Controls
System
• Select the tool that is installed on the product with
the button (A) in the quick action bar.
• Edit the selected tool with the button (B) in the quick
action bar.
"Breaker"
• "Grease": Adjust the quantity of grease that the
hydraulic pump supplies to the product.
• "Water": Disengage or engage the water function.
"Water" on page 50 .
Refer to
"Concrete crusher"
• "Water": Disengage or engage the water function.
"Water" on page 50 .
Refer to
"Bucket"
• "Pattern modifier": Disengage or engage dig mode.
When you operate the product with a bucket, the dig
mode is engaged when you start the product. Refer
"Pattern modifier" on page 50 .
to
1401 - 005 - 11.01.2024
Tools
Machine status
Functions
Controls
System
Remote settings
Revisions
Third party licenses
Factory settings
Brightness
Language
Units
Lock remote pincode
A
Breaker
Concrete crusher
Bucket
Grapple
B
"Grapple"
• "Water": Disengage or engage the water function.
"Water" on page 50 .
Refer to
• "Pattern modifier": Disengage or engage dig mode.
When you operate the product with a grapple, the
dig mode is disengaged when you start the product.
"Pattern modifier" on page 50 .
Refer to
"Steel shears" (DXR 145, DXR 275, DXR 305, DXR
315)
• "Water": Disengage or engage the water function.
"Water" on page 50 .
Refer to
"Drum cutter"
• "Water": Disengage or engage the water function.
"Water" on page 50 .
Refer to
"Custom tool 1–3"
• "Hydraulics": The value for the hydraulic oil pressure
and the flow can be adjusted from port A to port B.
Select the direction of the hydraulic oil.
• "Grease": Adjust the quantity of grease that the
hydraulic pump supplies to the product.
• "Water": Disengage/engage the function.
• "Extra function 1": Custom tool is controlled with right
side switch on the right joystick. The value for the
hydraulic oil pressure and the flow can be adjusted
from port A to port B. Select the direction of the
hydraulic oil. "E1" is shown in the display.
• "Extra function 2" (only DXR 145, DXR 275, DXR
305, DXR 315): Custom tool is controlled with left
side switch on the left joystick. The value for the
hydraulic oil pressure and the flow can be adjusted
Breaker
Concrete crusher
Bucket
Grapple
Drum cutter
View status
Active faults
Operating time
Oil refill
Track tension
49