Husqvarna DXR 95 Operator's Manual page 70

2. Connect the adapter to the battery charger. The
charger comes with 2 different adapters, refer to
Product overview (DXR 275, DXR 305, DXR 315)
on page 11 .
3. Connect the battery charger to a power outlet. The
power indicator (A) for the battery becomes red.
Battery charger on page 70 .
Refer to
4. Connect the remote control battery to the battery
charger. Make sure that the arrows (B) on the
remote control battery and the battery charger align.
The indicator (C) for the battery status on the battery
charger flashes green when the remote control
battery charges.
5. When the remote control battery is fully charged,
the indicator becomes green. Remove the remote
control battery from the battery charger.
6. Disconnect the battery charger from the mains
outlet.
70
B
A
C
Battery charger
The indicator for the battery status is 2 LEDs on the
battery charger: Battery Power LED (red) and Battery
Status LED (green).
Power Status Indication
LED LED
Red OFF The charger is ON. No battery in the
light charger.
Red Green The charger is ON. The battery is
light light fully charged.
Red Green The charger is ON. The battery
light light charges.
flash
Red OFF Error on the battery charger, or tem-
light perature out of the charging span.
flash
To start the product (DXR 95)
WARNING:
safety PLCs operates correctly, you must
disconnect the power plug each 24 hours.
1. Turn the emergency stop button (A) clockwise to
disengage the emergency stop.
2. Connect the product to a power source.
3. Step out of the work area with the remote control.
To guarantee that the
A
1401 - 005 - 11.01.2024