Maintenance
For guaranteed performance of your terminal, some maintenance work (replacing the fusing unit
and the transfer roll) has to be done on the printer approximately every 50,000 printed pages.
Please contact your supplier for this operation.
You can perform this operation when the quality of photocopied documents is no longer
satisfactory.
Confirm your choice by pressing the OK key.
I
NCIDENTS
If the communication fails, the fax advises you of an automatic retry later.
Example of what is displayed:
Current time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Time of next try - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Transmission from the feeder
You have the choice between:
• waiting until the transmission takes place at the given time
• restarting the transmission immediately by pressing
• abandoning transmission by pressing
Transmission from memory
You have the choice between:
• waiting until the transmission takes place at the given time
S
ERVICING
S
CANNER CALIBRATION
C
OMMUNICATION ERRORS
7-17
80 OK - ADVANCED FCT / CALIBRATION
FRI 13 MAY 20:13
0142685014 20:18
. To eject the document, press
again.