High Pressure Cleaning; Fire Extinguisher; Roll Over Protection Structure (Rops), Rops-Approved Cab; Welding - Fayat Group DYNAPAC CA25 Instruction Manual

10-03-2022

High pressure cleaning

Do not aim the water jet directly onto electrical components
or instrument panels.
Put a plastic bag over the filling cap of the fuel tank and
secure with an elastic band. This is to avoid pressurised
water entering the vent hole in the filler cap. This could cause
malfunctions, such as blocking of filters.
When washing the machine, do not aim the
water jet directly at the fuel tank cap. This is
particularly important when using a high-
pressure jet.

Fire extinguisher

If the machine catches fire, use a ABC-class powder fire
extinguisher. It is also possible to use a BE-class CO2
extinguisher.
Roll Over Protection Structure (ROPS), ROPS-
approved cab.
If the machine is fitted with a Roll Over
Protective Structure (ROPS, or ROPS-approved
cab), never carry out any welding or drilling in
the structure or cab.
Never attempt to repair a damaged ROPS
structure or cab. These must be replaced with a
new structure or cabs.

Welding

When carrying out welding on the machine, the
battery must
electronics disconnected from the electrical
system.
If possible, remove the part(s) to be welded from the
machine.
4812330982EN
Special instructions
be disconnected and the
16