6 Start-up
6.1 Switching on the monitor
•
Switch on the monitor using the power switch.
The green operation LED must now light up permanently.
6.2 Operator controls
Fig.:
Front view: Keypad and status LED
The four keys and the status LED are located on the front in the bottom right-hand corner of
the monitor.
The status LED is lit when power is supplied to the device and the power switch is set to On.
Key functions
In the OSD menu, the keys have the following functions:
Key
Situation
1
Always
2
Submenu is selected
Function is selected
3
Function is selected
4
All menus except the "Exit
OSD" menu
"Exit OSD" menu
SCD 19102 / SMD 19102
Instructions for Use, 08/2015
Action
Scrolling
Select submenu
Increase/change value
Decrease/change value
Return to previous menu level (settings are retained)
Return to main menu (settings are retained)
Startup
6.1 Switching on the monitor
27