Dec Defaults; Dec Printer Id; Auto Wrap; Initialization Report - Genicom LA36 User Manual

Using Set-Up Mode
1 and
MACRO
2 Options
MACRO
=DEC DEFLTS=========

(DEC Defaults)

<DEC PRT ID>

(DEC Printer ID)

<AUTO WRAP>
<EOT DISCON>
(End of Transmis-
sion Disconnect)
<INIT REPRT>
(Initialization
Report)
<AUTO ANSBK>
(Automatic
ANSWERBACK)
<ANSWER ENQ>
(ANSWERBACK
on ENQ)
4-20
Values Description
The following are the Set-Up options for the DEC
PPL2 protocol only.
Specify the printer ID to be given in response to DA
commands from the computer.
LA50 ID
LA120 ID
LA210 ID
Characters are received but not stored in the print
TRUNCATE
buffer.
End-of-line wrap. Causes a Carriage Return plus a
WRAP
Line Feed.
Specify whether the DSR signal is controlled by the
EOT character (DEC-423 serial interface only).
EOT character is ignored.
NO DISCON
DISCONNECT DTR signal turns low for five seconds when the EOT
character is detected.
Specify whether the status is sent to the computer
when the printer is turned on (DEC-423 serial
interface only).
Status is not sent.
NO
Status is sent.
YES
Specify whether the ANSWERBACK message is sent
to the computer when printer is turned on.
ANSWERBACK message is not sent.
NO
ANSWERBACK message is sent.
YES
Specify whether the ANSWERBACK message is sent
to the computer when printer receives an ENQ code.
ANSWERBACK message is not sent.
N O
ANSWERBACK message is sent.
YES