Language Selection - Deif GPC-3 Designers Reference Handbook

GPC-3 DRH 4189340587 UK
Term. number
20
21
22
The number of pulses depends on the actual adjusted setting of the nominal power:
Generator power
P
NOM
P
NOM
P
NOM
The kWh measurement is shown in the display as well, but the kvarh measurement is only
available through the transistor output.
Be careful - the maximum burden for the transistor outputs is 10 mA.

4.11 Language selection

4.11.1 Language selection
The unit can display different languages. It is delivered with one master language, which is English. This is
the default language, and it cannot be changed. In addition to the master language, 11 different languages
can be configured. This is done via the PC utility software "Translations" function.
The active language is selected in menu 6080. The language can be changed when connected to the PC
utility software. It is not possible to make language configuration from the display, but already configured lan-
guages can be selected.
SETUP +
SYST +
GEN +
6080 +
LANG + + or
DEIF A/S
Value Number of pulses (kWh)
<100 kW 1 pulse/kWh
100 to 1000 kW 1 pulse/10 kWh
>1000 kW 1 pulse/100 kWh
SAVE +
Output
kWh
kvarh
Common terminal
GPC
2010-01-02
SETUP MENU
SETUP
G
G f-L1
PROTECTION SETUP
PROT
G
SYSTEM SETUP
GENERAL SETUP
GEN MAINS
G
6080 Language
English
LANG
G
6081 Language
English
RESET
Additional functions
Number of pulses (kvarh)
1 pulse/kvarh
1 pulse/10 kvarh
1 pulse/100 kvarh
V 3.00.0
04:26:02
V3 V2 V1
0 0 0V
0.00Hz
CTRL I/O SYST
0 0 0V
COMM
0 0 0V
0 0 0V
SAVE
Page 63 of 122