Language Selection; Text In Status Line - Deif CGC 400 Reference Book

CGC 400 DRH 4189340786 UK
This will initiate an alarm when the signal on the digital input appears.
The relay output function can be selected to be ND (Normally Deenergised), NE (Normally Ener-
gised), Limit or Horn.
Digital
input
Alarm
input

7.22 Language selection

7.22.1 Language selection
The unit has the possibility to display different languages. It is delivered with one master language which is
English. This is the default language, and it cannot be changed. In addition to the master language, three dif-
ferent languages can be configured. This is done via the PC utility software.
The languages are selected in the system setup menu 6080. The language can be changed when connected
to the PC utility software. It is not possible to make language configuration from the display, but the already
configured languages can be selected.

7.23 Text in status line

This table explains the different messages in the status line text.
DEIF A/S
CGC 400
Relay
output
-
V DC
Additional functions
Page 84 of 96