Disassembly Of Gear Case - TOHATSU MFS 4D Service Manual

Lower Unit
23) Disassembly of Gear Case Ass'y
Check bearings 1 for cracks and generation of abnormal
1.
noise. Replace if necessary.
Do not reuse removed bearing.
· Do not remove bearing unless it is replaced
with new one.
· Before removing, check bearing for play or
deflection. Replace if necessary.
Remove bearing 1 by using commercially available bearing
2.
puller.
Remove bearing 2 using needle bearing press ass'y 3.
3.
Needle bearing press Ass'y 3 :
P/N. 369-72900-0
6-20
CAUTION
1
1 Bearing
Do not reuse.
3
2
2 Needle Bearing
Do not reuse.
3
2
4st 4/5/6 2020