Table of Contents
Advertisement
8) Inspection and clean of Carburetor
1.
Check air and fuel passages for dirt in the jet and foreign
substances. Clean carburetor body with cleaning fluid.
2.
Squirt all passages and jet passages with compressed air.
· Point the compressed air downward, taking
care that detergent and dust do not enter
the eyes and do not damage small parts
of the carburetor.
· Do not use wire to clean the jet. Doing so
may enlarge the jet hole, resulting in
significantly reducing the performance.
Check main jet 1 and main nozzle 2 for dirt. Clean or
3.
replace if necessary.
4.
Check float valve for bend and wear. Replace if necessary.
5.
Check float for deformation. Replace if necessary.
6.
Check float bowl's O ring for damage, and replace if
necessary.
4st 4/5/6 2020
CAUTION
4
1
2
4-17
Advertisement
Table of Contents
