Table of Contents
Advertisement
Turn crankshaft to a position where connecting rod bolts 4
5.
and connecting rod cap 5 can be removed, remove the
bolts, and then remove the cap.
Remove connecting rod 6 and piston ass'y from cylinder
6.
block.
· Removed bearings should be arranged in the
order they are removed.
· Do not reuse piston pin clips. Be sure to
replace with new ones.
Remove piston pin clip 7 and piston pin from piston 8
7.
and connecting rod ass'y, and then remove piston 9.
Take out crankshaft 0 from crankcase.
8.
9.
Remove bearing from crankcase by using a commercially
available bearing puller.
4st 4/5/6 2020
5
5
6 6
7
8
7 Piston Pin Clip
Do not reuse.
4 4
9
7
0 0
5-29
5
Advertisement
Table of Contents
