Table of Contents
Advertisement
Lower Unit
3. Inspection Item
1) Draining Gear Oil
Remove oil plugs 2 and then 1 to drain gear oil. Refer to
1.
"Replacement of Gear Oil" in Chapter 3.
Remove lower oil plug 1 first.
2) Removing Propeller
1.
Shift into reverse (R).
2.
Put a piece of wooden block between anti-ventilation plate
and propeller 4 to prevent rotation of propeller 4, and then
remove propeller nut 2 and then propeller 4.
· Before removing or installing propeller, be
sure to disconnect spark plug cap and
remove stop switch lock plate.
· When removing or installing propeller, do
not handle propeller with bare hands.
· Put a piece of wooden block between anti-
ventilation plate and propeller to prevent
rotation of propeller.
6-10
WARNING
3
1
3 Gasket
Do not reuse.
4
2
5
6
7
1 Split Pin
2 Propeller Nut
3 Washer
4 Propeller
5 Thrust Holder
6 Propeller Shaft
7 Propeller Shaft Housing
3
2
1
2
3
4
4st 4/5/6 2020
Advertisement
Table of Contents
