Power Unit
Attach O ring 5 and oil pump cover 6 and secure with
5.
bolts.
Apply much engine oil to oil pump and rotors
(outer and inner).
Attach push rods 7, rocker arms 8, rocker arm pivots and
6.
adjusting nuts 9 to cylinder head.
Ensure that push rods 7 are engaged with valve
lifters.
Perform tappet adjustment.
Refer to "5-16".
Attach cylinder head cover 0.
7.
8.
Attach cylinder head cover, and tighten bolts to specified
torque in the order shown.
Cylinder Head Cover Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
5-48
6 6
7 7
8
9
0 0
4
2
1
3
4st 4/5/6 2020