Set The Colour Of The Letterbox Panels; User Aspect Ratio Setting - evertz 7700 Manual

7700 MultiFrame Manual
7714HDC High Quality Down Converter

6.4.3. Set the Colour of the Letterbox Panels

There are three menu items used to set the panel colour. The menu item for each colour component
works in the same way so for simplicity only the menu item for the Red component will be shown in the
manual.
Scaler
Panel Colour Red
0 to 255

6.4.4. User aspect ratio setting

There are four registers for each input video standard that set the portion of the input picture that will be
converted. These register settings do not have any effect when the pre-defined aspect ratios are used.
Scaler
Input H Start
Input H Stop
Scaler
Input V Start
Input V Stop
There are four registers for each output video standard that define the size of the output image and how to
place the resulting image on the output video raster.
Scaler
Output H Start
Output H Stop
Scaler
Output V Start
Output V Stop
7714HDC - 22
This control defines one of the component colours for the colour of the side
panels. Set the R, G or B value for the side panel colour that you want.
Hint: you can use a standard colour picker such as is available in Microsoft
Paint to determine the colour values that you want to use.
The Input H Start and Input H Stop define the horizontal portion of the input
image to process to the output
The Input V Start and Input V Stop define the vertical portion of the input
image to process to the output
The Output H Start and Output H Stop define how to scale the cropped
input image horizontally and where to place it horizontally on the output
raster. The image will be stretched to fill the width.
The Output V Start and Output V Stop define how to scale the cropped
input image vertically and where to place it vertically on the output raster.
The image will be stretched to fill the height.
Revision 1.1